Understanding TVC's

by Paul Limbrick, on 23-03-2021
Find me on:

 

Microbiologist holding a Petri dish with bacteria, horizontal

To better understand a ‘total viable count’ (TVC), it may be prudent to ask the following questions:

  1. What is a TVC and why do we sample/test for TVC?
  2. When do we sample/test for TVC?
  3. How do we sample/test for TVC?
  4. What do TVC results mean and what corrective action is required?

 

1. What is a TVC and why do we sample/test for TVC?

A TVC test is a ‘total viable count’ which essentially indicates the level of heterotrophic organisms within a sample. Moreover, heterotrophs are a ‘large group’ of organisms that can be further broken down into the following sub-groups:

- Fungi
- Yeasts
- Moulds
- Bacteria

Therefore, the results of a TVC test may offer an indication into the ‘general level’ of contamination within a sampled system. TVC may also be used to assist with identifying microbial contaminants of environmental and or human importance (discussed below in ‘how’ do we sample/test for TVC?).


Download Your FREE guide 'The future of Water Safety'

2. When do we sample/test for TVC?

When implementing a water management strategy for the safe management of potable water systems, this inevitably will be underpinned by ‘monitoring’, not sampling!

Therefore, in accordance with associated guidance notes and legislation (ACOP L8, HSG274 and HTM04-01 (health estates)) underpinned by the Health and Safety at Work etc. Act 1974 and Health and Social Care Act 2008 (Regulated Activities (Regulations 2015) within health estates), monitoring will be undertaken to ‘establish control’ and sampling will be undertaken for a ‘specific reason’. Such reasoning may include the identification of taint taste or odour issues with potable water or following the completion of disinfection works – to help establish the effectiveness of the disinfection process undertaken.

However, other (non-potable) waters such as those within endoscopy units and cooling towers will be subject to a different sampling rationale in accordance with associated guidance notes and healthcare technical memoranda – to help ensure that these systems (as well as potable water systems) are safely managed whilst undertaking a proportionate approach to water hygiene risk management.

Therefore, understanding ‘proportionality’ is key to delivering a ‘sustainable, ‘effective’ and ‘compliant’ water safety strategy of which sampling forms a part.


3. How do we sample/test for TVC?

TVC samples should be obtained in accordance with BS 8554 (sampling from hot and cold water systems) to help ensure that results are representative of the part of the system sampled.

Heterotrophic organisms use organic carbon for propagation and proliferation which supports the rationale for the chosen growth media used in the laboratory – ‘yeast extract agar’.


bacteria-in-petri-dish-1

Due to the diverse number of organisms that can be cultured on this type of growth media within the test laboratory, these tests are referred to as non-selective – unlike those used for the culture and enumeration of specific pathogenic bacteria such as Pseudomonas aeruginosa and Legionella which require the use of ‘selective media’ and methodology that support the growth of the ‘target organism’ and discourage the growth of ‘non-target organisms’.

TVC samples are also incubated at different temperatures depending on the environment sampled, for example: it’s indicated to incubate samples from potable water systems at 22°C or 37°C whereas the prescribed method for incubating samples from washer disinfector final rinse waters is 30°C (in accordance with the requirements of HTM 01-06).

30°C is also the prescribed temperature for samples taken from cooling tower systems (in accordance with ACOP L8, HSG274 Part 1). Therefore, 30°C is accepted as the temperature which best-represents ‘favoured growth conditions’ within these risk systems.

The reasoning behind incubating potable water samples at 22°C and 37˚C respectively is to delineate between what may be considered environmental contamination and microbiological contaminants of human importance, as we know that the optimal growth temperature for waterborne pathogens such as Legionella pneumophila is 37°C.


4. What do TVC results mean and what corrective action is required?

Whilst research suggests that TVC test results do not always correlate well with results from tests undertaken selecting for contaminants of ‘human importance’, they may provide a broad indication of water system safety – considering that such tests are indicated following the identification of taint, taste or odour issues with water, which in turn may be associated with microbial contamination (release of secondary metabolites from fungal contaminants).


82 - TVC-1

So, the questions remain; at what point would it be considered prudent to take corrective action against TVC results (TVC action level) and what corrective action may be taken – considering the requirement to manage water risk with proportionality? The ‘type and extent’ of corrective action to be taken will be discussed in the ‘follow-on’ blog, but the table below helps to identify a suitable ‘action level’ for TVC – underpinned by occupant susceptibility:

Occupant Susceptibility Outlet(s) sampled TVC action level
Very High – those presenting with immunocompromise or neutropenia (augmented care). Representative outlets/assets agreed by water safety/management group (WSG/WMG). >50 cfu/ml
Significant – general healthcare/health estates.

Outlets/assets agreed by water safety/management group (WSG/WMG).

>100 cfu/ml

Lownon-healthcare estates – clerical/general staff areas.

Outlets/assets agreed by water safety/management group (WSG/WMG).

>150 cfu/ml



If you have questions regarding the issues raised above or you would like to speak with one of our consultants please 
click here to get in touch.

Editors Note: The information provided in this blog is correct at date of original publication – March 2021

© Water Hygiene Centre 2021

 

New call-to-action

 

About the author

Paul Limbrick

Paul is a Microbiologist who has diversified over his career into supporting clients with understanding of water control strategies, water sampling strategies along with consultancy support of specialist advisory services. These services have included membership of Water Safety Groups, shaping water safety plans [policy and operational control plans]. All of which reflect the offering of our Authorising Engineer (Water).

Share your thoughts